Chapter 10 F-distribution

10.1 TBA How much finished

10%

10.2 Introduction

Since it plays an important role in sample size estimation, it is helpful to examine the behavior of the F-distribution. In the following ndf = numerator degrees of freedom, ddf = denominator degrees of freedom and ncp = non-centrality parameter (i.e., the \(\Delta\) appearing in Eqn. (11.6) of (Dev P. Chakraborty 2017)).

The use of three R functions is demonstrated.

  • qf(p,ndf,ddf) is the quantile function of the F-distribution for specified values of p, ndf and ddf, i.e., the value x such that fraction p of the area under the F-distribution lies to the right of x. Since ncp is not included as a parameter, the default value, i.e., zero, is used. This is called the central F-distribution.

  • df(x,ndf,ddf,ncp) is the probability density function (pdf) of the F-distribution, as a function of x, for specified values of ndf, ddf and ncp.

  • pf(x,ndf,ddf,ncp) is the probability (or cumulative) distribution function of the F-distribution for specified values of ndf, ddf and ncp.

10.3 Effect of ncp for ndf = 2 and ddf = 10

  • Four values of ncp are considered (0, 2, 5, 10) for ddf = 10.
  • fCrit is the critical value of the F distribution, i.e., that value such that fraction \(\alpha\) of the area is to the right of the critical value, i.e., fCrit is identical in statistical notation to \({{F}_{1-\alpha ,ndf,ddf}}\).
ndf <- 2;ddf <- 10;ncp <- c(0,2,5,10)
alpha <- 0.05
fCrit <- qf(1-alpha, ndf,ddf)
x <- seq(1, 20, 0.1)
myLabel <- c("A", "B", "C", "D")
myLabelIndx <- 1
pFgtFCrit <- NULL
for (i in 1:length(ncp))
{
  y <- df(x,ndf,ddf,ncp=ncp[i])
  pFgtFCrit <- c(pFgtFCrit, 1-pf(fCrit, ndf, ddf, ncp = ncp[i]))
}  
for (i in 1:length(ncp))
{
  y <- df(x,ndf,ddf,ncp=ncp[i])
  curveData <- data.frame(x = x, pdf = y)
  curvePlot <- ggplot(data = curveData, mapping = aes(x = x, y = pdf)) + 
    geom_line() +
    ggtitle(myLabel[myLabelIndx]);myLabelIndx <- myLabelIndx + 1
  print(curvePlot)
}
fCrit_2_10 <- fCrit # convention fCrit_ndf_ddf

ndf ddf fCrit ncp pFgtFCrit
A 2 10 4.102821 0 0.0500000
B 2 10 4.102821 2 0.1775840
C 2 10 4.102821 5 0.3876841
D 2 10 4.102821 10 0.6769776

10.4 Comments

10.4.1 Fig. A

  • This corresponds to ncp = 0, i.e., the central F-distribution.
  • The integral under this distribution is unity (this is also true for all plots in this vignette).
  • The critical value, fCrit in the above code block, is the value of x such that the probability of exceeding x is \(\alpha\). The corresponding parameter alpha is defined above as 0.05.
  • In the current example fCrit = 4.102821. Notice the use of the quantile function qf() to determine this value, and the default value of ncp, namely zero, is used; specifically, one does not pass a 4th argument to qf().
  • The decision rule for rejecting the NH uses the NH distribution of the F-statistic, i.e., reject the NH if F >= fCrit. As expected, prob > fCrit = 0.05 because this is how fCrit was defined.

10.4.2 Fig. B

  • This corresponds to ncp = 2, ndf = 2 and ddf = 10.
  • The distribution is slightly shifted to the right as compared to Fig. A, thereby making it more likely that the observed value of the F-statistic will exceed the critical value determined for the NH distribution.
  • In fact, prob > fCrit = 0.177584, i.e., the statistical power (compare this to Fig. A where prob > fCrit was 0.05).

10.4.3 Fig. C

  • This corresponds to ncp = 5, ndf = 2 and ddf = 10.
  • Now prob > fCrit = 0.3876841.
  • Power has increased compared to Fig. B.

10.4.4 Fig. D

  • This corresponds to ncp = 10, ndf = 2 and ddf = 10.
  • Now prob > fCrit is 0.6769776.
  • Power has increased compared to Fig. C.
  • The effect of the shift is most obvious in Fig. C and Fig. D.
  • Considering a vertical line at x = 4.102821, fraction 0.6769776 of the probability distribution in Fig. D lies to the right of this line
  • Therefore the NH is likely to be rejected with probability 0.6769776.

10.4.5 Summary

The larger that non-centrality parameter, the greater the shift to the right of the F-distribution, and the greater the statistical power.

10.5 Effect of ncp for ndf = 2 and ddf = 100

ndf ddf fCrit ncp pFgtFCrit
A 2 10 4.102821 0 0.0500000
B 2 10 4.102821 2 0.1775840
C 2 10 4.102821 5 0.3876841
D 2 10 4.102821 10 0.6769776
E 2 100 3.087296 0 0.0500000
F 2 100 3.087296 2 0.2199264
G 2 100 3.087296 5 0.4910802
H 2 100 3.087296 10 0.8029764

10.6 Comments

  • All comparisons in this sections are at the same values of ncp defined above.
  • And between ddf = 100 and ddf = 10.

10.6.1 Fig. E

  • This corresponds to ncp = 0, ndf = 2 and ddf = 100.
  • The critical value is fCrit_2_100 = 3.0872959. Notice the decrease compared to the previous value for ncp = 0, i.e., 4.102821, for ddf = 10.
  • One expects that increasing ddf will make it more likely that the NH will be rejected, and this is confirmed below.
  • All else equal, statistical power increases with increasing ddf.

10.6.2 Fig. F

  • This corresponds to ncp = 2, ndf = 2 and ddf = 100.
  • The probability of exceeding the critical value is prob > fCrit_2_100 = 0.2199264, greater than the previous value, i.e., 0.177584 for ddf = 10.

10.6.3 Fig. G

  • This corresponds to ncp = 5, ndf = 2 and ddf = 100.
  • The probability of exceeding the critical value is prob > fCrit_2_100 = 0.4910802.
  • This is greater than the previous value, i.e., 0.3876841 for ddf = 10.

10.6.4 Fig. H

  • This corresponds to ncp = 10, ndf = 2 and ddf = 100.
  • The probability of exceeding the critical value is prob > fCrit_2_100 is 0.8029764.
  • This is greater than the previous value, i.e., 0.6769776 for ddf = 10.

10.7 Effect of ncp for ndf = 1, ddf = 100

ndf ddf fCrit ncp pFgtFCrit
A 2 10 4.102821 0 0.0500000
B 2 10 4.102821 2 0.1775840
C 2 10 4.102821 5 0.3876841
D 2 10 4.102821 10 0.6769776
E 2 100 3.087296 0 0.0500000
F 2 100 3.087296 2 0.2199264
G 2 100 3.087296 5 0.4910802
H 2 100 3.087296 10 0.8029764
I 1 100 3.936143 0 0.0500000
J 1 100 3.936143 2 0.2883607
K 1 100 3.936143 5 0.6004962
L 1 100 3.936143 10 0.8793619

10.8 Comments

  • All comparisons in this sections are at the same values of ncp defined above and at ddf = 100.
  • And between ndf = 1 and ndf = 2.

10.8.1 Fig. I

  • This corresponds to ncp = 0, ndf = 1 and ddf = 100.
  • The critical value is fCrit_1_100 = 3.936143.
  • Notice the increase in the critical value as compared to the corresponding value for ndf = 2, i.e., 3.0872959.
  • One expects power to decrease: the following code demonstrates that as ndf increases, the critical value fCrit decreases.
  • In significance testing generally ndf = I -1.
  • It more likely that the NH will be rejected with increasing numbers of treatments.
ndf ddf fCrit
1 100 3.936143
2 100 3.087296
5 100 2.305318
10 100 1.926692
12 100 1.850255
15 100 1.767530
20 100 1.676434

10.8.2 Fig. J

  • This corresponds to ncp = 2, ndf = 1 and ddf = 100.
  • Now prob > fCrit_1_100 = 0.2883607, 0.1351602, 0.0168844, 8.9992114^{-4}, 3.2584757^{-4}, 8.1619807^{-5}, 1.1084132^{-5}, larger than the previous value 0.2199264.
  • The power has actually increased.

10.8.3 Fig. K

  • This corresponds to ncp = 5, ndf = 1 and ddf = 100`’,
  • Now prob > fCrit_1_100 = 0.6004962, 0.3632847, 0.0699798, 0.0048836, 0.0018367, 4.6889533^{-4}, 6.2058692^{-5}, larger than the previous value 0.4910802.
  • Again, the power has actually increased.

10.8.4 Fig. L

  • This corresponds to ncp = 10, ndf = 1 and ddf = 100
  • Now prob > fCrit_1_100 is 0.8793619, 0.7000168, 0.2459501, 0.0290856, 0.0123033, 0.0035298, 5.1213398^{-4}, larger than the previous value 0.8029764.
  • The power has actually increased.

10.9 Summary

  • Power increases with increasing ddf and ncp.
  • The effect of increasing ncp is quite dramatic. This is because power depends on the square of ncp.
  • As ndf increases, fCrit decreases, which makes it more likely that the NH will be rejected.
  • With increasing numbers of treatments the probability is greater that the F-statistic will be large enough to exceed the critical value.

References

Chakraborty, Dev P. 2017. Observer Performance Methods for Diagnostic Imaging: Foundations, Modeling, and Applications with r-Based Examples. Boca Raton, FL: CRC Press.